The Standalone Digidesign CoreAudio Driver v7.4.2 was tested and qualified on Mac OS X 10.5.3 only. Version 7.4.2 of the Standalone.

Digidesign CoreAudio Driver

Version 7.0 for Mac OS X 10.4 'Tiger'

Now Available — Standalone Digidesign CoreAudio Driver Version 7.0

If you already have Pro Tools TDM 6.9.2 or higher or Pro Tools LE 6.9.2 or higher installed on your system, you should not use the Standalone Digidesign CoreAudio Driver installer. Please install the CoreAudio Driver for your system using the Pro Tools installers listed here:

If You Have Pro Tools 6.9.2/6.9.3 or Pro Tools 7 Installed on Mac OS X 10.4

Pro Tools HD 7 and Pro Tools LE 7 include the option to install the Digidesign CoreAudio Driver for systems supported by Pro Tools 7. See the Digidesign CoreAudio Q & A section below for a listed of third-party applications tested with the Digidesign CoreAudio Driver version 7.0.

Pro Tools TDM 6.9.2, Pro Tools TDM 6.9.3, and Pro Tools LE 6.9.2 include the option to install the Digidesign CoreAudio Driver version 6.9.2 for Pro Tools HD Accel, Pro Tools HD, Digi 002, Digi 002 Rack, and Mbox systems on Mac OS X 10.4. If you are using Pro Tools TDM 6.9.2 or 6.9.3, or Pro Tools LE 6.9.2, you should download the latest CS update for those versions, which include fixes for Coreaudio:

Mbox 2 systems with Pro Tools LE 6.8.1 include a version of the Digidesign CoreAudio Driver specifically for the Mbox 2. Other Pro Tools LE 6.x versions will not work with Mbox 2.

What is the Digidesign CoreAudio Driver?

The Digidesign CoreAudio Driver is a multi-client, multichannel sound driver that allows CoreAudio-compatible applications to record and play back through the following Digidesign audio interfaces:

  • Pro Tools HD Accel
  • Pro Tools HD
  • Digi 002
  • Digi 002 Rack
  • Mbox 2
  • Mbox

Full-duplex recording and playback of 24-bit audio is supported at sample rates up to 96 kHz, depending on your Digidesign hardware and CoreAudio client application.

The Digidesign CoreAudio Driver will provide up to 18 channels of I/O depending on your Pro Tools System:

  • Up to 8 channels of I/O with Pro Tools HD or HD Accel systems
  • Up to 18 channels of I/O with Digi 002 and Digi 002 Rack systems (or 18 in and 16 out with S/PDIF Mirroring enabled)
  • Up to 2 channels of I/O with Mbox systems
  • For Pro Tools TDM systems with more than one card and multiple I/Os, only the primary I/O connected to the first (core) card can be used with CoreAudio

Not Tested with Digidesign CoreAudio Driver for Mac OS X 10.4

  • Pro Tools 24 MIX systems
  • Pro Tools 24 (d24 card) systems
  • Digi 001
  • Audiomedia III systems

See the Digidesign CoreAudio Q & A section below for more details.

Standalone Digidesign CoreAudio Driver 7.0 for Mac OS X 10.4

For Owners of Supported Digidesign Hardware on Mac OS X 10.4 'Tiger' That Do Not Have Pro Tools Installed

December 20, 2005

This download is for owners of supported Digidesign hardware on Mac OS X 10.4.x 'Tiger' that wish to install the Digidesign CoreAudio Driver without installing Pro Tools.

If you already have Pro Tools TDM 6.9.2 or higher or Pro Tools LE 6.9.2 or higher installed on your system, you should not use the Standalone Digidesign CoreAudio Driver installer. Please install the CoreAudio Driver for your system using your Pro Tools installer listed at the top of this page. The Digidesign CoreAudio Driver version 7.0 wil NOT work with Pro Tools 6.x, and installs files that may make Pro Tools 6.x unusable.

If you have either Pro Tools TDM 6.9 or lower or Pro Tools LE 6.9 or lower (which will not run on Tiger) installed on your system, you should uninstall Pro Tools from your Tiger startup system before using the Standalone Digidesign CoreAudio Driver installer. To uninstall Pro Tools, insert your Pro Tools CD, run the 'Install Pro Tools' application, and choose Uninstall from the menu instead of Custom Install or Easy Install. Pro Tools application web updaters (except for CS versions) also have the Install/Uninstall menu.

System Requirements — Standalone Digidesign CoreAudio Driver 7.0

The Standalone Digidesign CoreAudio Driver 7.0 can be installed on systems that do not have Pro Tools installed on Mac OS X 10.4.x 'Tiger'. (instructions below)

Drvstore folder vista

The Digidesign CoreAudio Driver is a multi-client, multichannel sound driver that allows CoreAudio-compatible applications to record and play back through the following Digidesign audio interfaces:

  • Pro Tools HD Accel
  • Pro Tools HD
  • Digi 002
  • Digi 002 Rack
  • Mbox

Not Tested with Digidesign CoreAudio Driver Version 7.0

  • Pro Tools 24 MIX systems
  • Pro Tools 24 (d24 card) systems
  • Digi 001
  • Audiomedia III systems

See the Digidesign CoreAudio Q & A section below for more details.

Documentation:

For more information on installation, usage, compatibility and limitations, please review the CoreAudio Usage Guide and CoreAudio Read Me files provided with the Digidesign CoreAudio 7.0 installer. The CoreAudio Usage Guide and CoreAudio Read Me are installed here:

  • Applications/Digidesign/Documentation/Drivers/

Also available for separate download here:

  • CoreAudio Usage Guide (472 k)
  • CoreAudio Read Me (42 k)

Digidesign CoreAudio Driver Q & A

Q: Does the Digidesign CoreAudio driver support simultaneous use of multiple client applications?
A: Yes. Beginning with version 6.5 and higher, the Digidesign CoreAudio Driver supports multiple CoreAudio clients. You no longer have to quit a CoreAudio application before working with another.

Coreaudio Driver 7.4.2 For Mac

Q: Can I use Pro Tools in tandem with other CoreAudio applications?
A: No. Pro Tools requires exclusive access to Digidesign hardware and thus it cannot be used simultaneously with other CoreAudio applications. You will have to quit Pro Tools before using other CoreAudio programs, or vice versa.

Q: Why can't I hear my Mac system sounds through my Digidesign hardware using the Digidesign CoreAudio Driver?
A: The Digidesign CoreAudio Driver for Mac OS X does not support playback of system sounds. Your Mac system sounds will continue to be available through your Mac speaker and regular Mac line out.

Q: Why doesn't the Digidesign CoreAudio Driver for OS X allow the volume output or input to be adjusted in the OS X Sound Preference Panel? The volume sliders are greyed out.
A:This is correct behavior. The Digidesign CoreAudio Driver does not support this function. Playback volume adjustments can be made within the Digi CoreAudio Manager application.

Q: Will Pro Tools 24 MIX, Pro Tools 24, Digi 001, or Audiomedia III hardware work? I can't find them listed under supported systems.
A: Pro Tools 24 MIX, Pro Tools 24 (d24 card), Digi 001, and Audiomedia III hardware have not been tested with Mac OS X 10.4, and there is no version of Pro Tools for Mac OS X 10.4 that supports this hardware. While you can try the Digidesign CoreAudo Driver with these discontinued systems, they may not work.

Q: What about compatibility with Mac OS X 10.3 'Panther' and 10.2.x 'Jaguar', with or without Pro Tools installed?
A: The Digidesign CoreAudio Driver for Mac OS X 10.4 'Tiger' has not been tested with Mac OS X 10.3 or 10.2. We recommend that you use the correct version of the driver for your version of Mac OS X.

The Digidesign CoreAudio driver version 6.9 for Mac OS X 10.3.x can be downloaded here:

The Digidesign CoreAudio driver version 6.1.2 for Mac OS X 10.2.x can be downloaded here:

Q: What OS X applications work with the Digidesign CoreAudio Driver v7.0?
A: With a few possible exceptions, any CoreAudio-compatible application will work with the Digidesign CoreAudio driver. The following third-party CoreAudio-compatible client applications have been tested with the Digidesign CoreAudio Driver v7.0:

  • Ignition Pack
  • Ableton Live 4.1x
  • Reason 3.04
  • Cubase SX3
  • Apple GarageBand 2.0.2
  • Apple iLife v5
  • Apple Quicktime 7.x
  • RealOne 10.x
  • Roxio Toast with Jam 6.x

See the CoreAudio Read Me (42 included with download) for additional information and known issues.

Q: How can you avoid distortion and audio sync errors when using Logic Audio with the Digidesign CoreAudio Driver?
A: In our testing, we found that Logic will not play audio properly through the CoreAudio driver until you go into the driver preferences, and manually reset the buffer size to another setting (it defaults to 512, and it can be switched back to 512, but it needs to be set to another value first). if you don't do this, Logic plays the file back with distortion and you will eventually get an audio sync error. Once you've manually changed the buffer size, this problem goes away.

Q: How do you configure Roxio Toast or Jam to use the Digidesign CoreAudio Driver?
A: In Roxio Toast 5.2 or Jam 5.01, set the Sound Out to Mac OS X Audio HAL. Jam v6 allows either Mac OS X Audio HAL or Digidesign HW. Toast v6 will automatically default to whichever hardware is selected in the Sound control panel.

Q: Is there still an 'opt-in' list?
A: No. Because of its ability to work with multiple clients, the Digidesign CoreAudio driver no longer requires an 'opt-in' list. To exclude applications from access to the Digidesign CoreAudio driver, press and hold down the Shift key when lanching an application. Please see the Digidesign CoreAudio usage guide for more information.

Q: What are the limitations of the Digidesign CoreAudio Driver?
A: As listed in the Digidesign CoreAudio Read Me:

  • The multi-client CoreAudio Driver cannot be used to preview sound files in Macintosh Finder. When you view a sound file Mac OS X Finder window with files displayed by columns, a preview bar is displayed next to it. This preview bar lets you audition the sound file. The sound will always play back though the Macintosh’s built-in audio controller (through the Macintosh’s speaker or headphone jack). However, if you double-click a sound file, the QuickTime application will launch, and can use the multi-client Digidesign CoreAudio Driver for playback.
  • The multi-client Digidesign CoreAudio Driver cannot be used for playback of System Sounds.

Installing the Standalone Digidesign CoreAudio Driver v7.0

The download includes a complete installer application. Double-click on the downloaded Mac OS X Disk Image to mount it on your desktop, then double-click the installer.

The Digidesign CoreAudio Driver can be installed as a stand-alone driver on systems that do not have Pro Tools installed.

To install the Digidesign CoreAudio Driver 7.0 Without Pro Tools:

  1. From the link below, download and expand the Digidesign CoreAudio 7.0 installer
  2. Double-click on the Install CoreAudio file.
  3. From the pop-up menu, choose the default Easy Install
  4. Follow the on-screen instructions to install the Digidesign CoreAudio Driver.
  5. When the installation is complete, quit the installer and restart your computer.

The installer places the file named Digidesign CoreAudio.plugin in this location:

  • /Library/Audio/Plug-Ins/HAL

The Digi CoreAudio Manager application is installed on your hard drive here: Free download moonlight engine 1365.

  • /Applications/Digidesign

Previous versions of the Digidesign CoreAudio.plugin and the Digidesign CoreAudio Setup application are removed by the installer. The CoreAudio Usage Guide and CoreAudio Read Me are installed here:

  • Applications/Digidesign/Documentation/Drivers/

Removing the Digidesign CoreAudio Driver v7.0

To uninstall the Digidesign CoreAudio Driver:

  1. From the link below, download and expand the Digidesign CoreAudio 7.0 installer
  2. Double-click on the Install CoreAudio file.
  3. From the pop-up menu, change Easy Install to Uninstall
  4. Click the uninstall button to remove Digidesign CoreAudio files from your computer

To manually uninstall, remove the 'Digidesign CoreAudio.plugin' file from the following location on your hard drive: Library/Audio/Plug-Ins/HAL

Download Standalone Digidesign CoreAudio Driver 7.0 Installer

for Digidesign Hardware on Mac OS X 10.4 (Tiger)

11.7 MB Mac OS X Disk Image (.dmg)

Previous Version

  • Only for Digidesign hardware on Mac OS X 10.4 (Tiger) without Pro Tools installed
  • 10.6 MB MacBinary (.bin) encoded format, decodes to Mac OS X Disk Image (.dmg)

DIGIDESIGN, AVID and PRO TOOLS are trademarks or registered trademarks of Digidesign and/or Avid Technology, Inc. CoreAudio is a trademark of Apple Computer, Inc. All other trademarks are the property of their respective owners.

More Information:

Digidesign Downloads Digidesign Customer Service Digidesign Technical Support

  • вторник 14 апреля
  • 16
    Search

Coreaudio Driver 7.4.2 For Mac