A performance engine block is suggested in top-performing cars and is necessary if you are planning to equip your vehicle with performance engine components. Surf our online catalog for a large choice of Honda Civic performance engine blocks, made by trustworthy aftermarket brands, such as Brian Crower, Blox Racing, and Dart.

(Redirected from Honda CVCC engine)
A CVCC engine for Honda Civic

CVCC is a trademark by the Honda Motor Company for an engine with reduced automotive emissions, which stood for 'Compound Vortex Controlled Combustion'.[1] The first mention of Honda developed CVCC technology was done by Mr. Soichiro Honda February 12, 1971, at the Federation of Economic Organizations Hall in Otemachi, Chiyoda-ku, Tokyo.[2] Honda's engineers at the time, Mr. Date conferred with Mr. Yagi and Mr. Nakagawa about the possibility of creating lean combustion via a prechamber, which some diesel engines utilized.[3] The first engine to be installed with the CVCC approach for testing was a single-cylinder, 300 cc version of Honda's EA engine installed in a modified Honda N600 hatchback in January 1970.[3] This technology allowed Honda's cars to meet Japanese and United Statesemission standards in the 1970s without a catalytic converter. A type of stratified charge engine, it first appeared on the 1975 ED1 engine. As emission laws advanced and required more stringent admissible levels, Honda abandoned the CVCC method and introduced PGM-FI, or Programmed Fuel Injection on all Honda vehicles. Some vehicles in Japan had a combination of electronically controlled carburetors, called PGM-Carb on specific, transitional Honda D, E and ZC engines.

Toyota briefly used a similar technology in the mid-to-late seventies, called TTC-V. In 2007, the Honda CVCC technology was added to the Mechanical Engineering Heritage of Japan.

Construction and operation[edit]

Honda CVCC engines have normal inlet and exhaust valves, plus a small auxiliary inlet valve which provides a relatively rich air–fuel mixture to a volume near the spark plug. The remaining air–fuel charge, drawn into the cylinder through the main inlet valve, is leaner than normal. The volume near the spark plug is contained by a small perforated metal plate. Upon ignition flame fronts emerge from the perforations and ignite the remainder of the air–fuel charge. The remaining engine cycle is as per a standard four-stroke engine.

This combination of a rich mixture near the spark plug, and a lean mixture in the cylinder allowed stable running, yet complete combustion of fuel, thus reducing CO (carbon monoxide) and hydrocarbon emissions. This method allowed the engine to burn less fuel more efficiently without the use of an exhaust gas recirculation valve or a catalytic converter, although those methods were installed later to further improve emission reduction. How to train your dragon 3 pirates bay.

Advantages over previous stratified charge engines[edit]

Honda's big advancement with CVCC was that they were able to use carburetors and they did not rely on intake swirl. Previous versions of stratified charge engines needed costly fuel injection systems. Additionally, previous engines tried to increase the velocity and swirl of the intake charge in keeping the rich and lean mixtures separated. Honda was able to keep the charges adequately separated by combustion chamber shape.

Early design flaw[edit]

Some of the early CVCC engines had a problem with the auxiliary valves' retaining collars vibrating loose. Once unscrewed, engine oil would leak from the valvetrain into the pre-combustion chamber, causing a sudden loss of power and massive amounts of smoke to emanate from the exhaust pipe. The condition simulated a blown engine, even though the needed repair was quite simple. Honda eventually came up with a fix involving metal retaining rings that slipped over the collars and prevented them from backing out of their threads.


The 1983 Honda Prelude (the first year of the second generation of Preludes) used a CVCC design and a catalytic converter to reduce emissions, called CVCC-II, along with two separate sidedraft carburettors (instead of a single, progressive twin-choke carburettor). The following year a standard cylinder head design was used and the center carburettor (providing the rich mixture) was dropped. The Honda City AA, introduced in November 1981, also used a CVCC-II engine called the ER.[4]

List of CVCC equipped engines[edit]


The ED series introduced the CVCC technology. This group displaced 1,487 cc (1.487 L; 90.7 cu in) and used an SOHC 12-valve design. Output with a 3 barrel carburetor was 52 hp (39 kW) at 5000 rpm and 68 lb·ft (92 N·m) at 3000 rpm.

  • ED1
    • 1975- Honda CivicCVCC
  • ED2
    • 1975- Honda CivicWagon
  • ED3
    • 1976-1979 Honda CivicCVCC
  • ED4
    • 1976-1979 Honda CivicWagon


The EF was an SOHC 12-valve (CVCC) engine, displacing 1.6 L (1598 cc). Output was 68 hp (51 kW) at 5000 rpm and 85 lb·ft (115 N·m) at 3000 rpm.

  • 74 mm bore x 93 mm stroke
  • Cast iron block & aluminum cylinder head
  • Six port cylinder head (4 intake port / 2 exhaust ports)
  • Valve order (IEEIIEEI)
  • Three barrel Keihin carburettor (1976 had manual choke, 1977 & 1978 were automatic choke)
  • Point type ignition

USAGE: 1976-1978 Honda Accord CVCC, US market automobiles.[5]


The EJ displaced 1,335 cc (1.3 L; 81.5 cu in) and was an SOHC 12-valve CVCC engine with a 3 barrel carburetor. 4 intake valves, 4 exhaust valves, and 4 auxiliary valves. Output was 68 hp (51 kW) at 5000 rpm and 77 lb·ft (104 N·m) at 3000 rpm.

  • EJ1
    • 1980- Honda Civic, Honda Ballade, Triumph Acclaim
    • 1981-1983 Honda Civic CVCC


The EK was an SOHC 12-valve (CVCC) engine, displacing 1.8 L (1,751 cc). Output varied (see below) as the engine itself was refined.

  • 77 mm bore x 94 mm stroke
  • Cast iron block & aluminum cylinder head
  • Three barrel Keihin carburettor (all were automatic choke)
  • Electronic ignition
  • Oil cooler (or provision for this in the block)
  • Cylinder head iterations:
    • Six port cylinder head (4 intake port / 2 exhaust ports) & IEEIIEEI valve order for 1979 & 1980 49 state
    • Eight Port cylinder head (4 intake port / 4 exhaust ports) & IEEIIEEI valve order for 1980 (California only) and 1981 (50 states)
    • Eight Port cylinder head (4 intake port / 4 exhaust ports) & EIEIIEIE valve order from 1982 to end of CVCC production (1985)
  • Power: 6-port output was 72 hp (54 kW) at 4,500 rpm and 94 lb·ft (127 N·m) at 3,000 rpm, while the original 8-port head raised this to 75 hp (56 kW) at 4,500 rpm and 96 lb·ft (130 N·m) at 3,000 rpm. The revised 4-port (82 & later) had another slight horsepower increase.

1979-1983 Honda Accord CVCC (US market)
1979-1982 Honda Prelude CVCC (US market)
1981-1985 Honda Vigor (JDM)[5]

EK9 is not related to the EK engine - EK9 is simply the chassis code for the 1997-2001 Honda Civic Type-R Hatchback.


The EM displaced 1,487 cc (1.487 L; 90.7 cu in) and was an SOHC 12-valve CVCC engine. Early versions produced 52 hp (39 kW) at 5000 rpm and 68 lb·ft (92 Nm) at 3000 rpm, while later ones upped the output to 63 hp (47 kW) at 5000 rpm and 77 lb·ft (104 N·m) at 3000 rpm. All used a 3 barrel carburetor.

  • EM1
    • 1980 Honda Civic, 52 hp (39 kW)
    • 1981-1983 Honda Civic, 63 hp (47 kW)


The EP displaced 1,601 cc (1.601 L; 97.7 cu in) and was an SOHC 8-valve engine with a 2 barrel carburetor. Output was 90 ps (66 kW) at 5500 rpm and 13.2 kg·m (129 N·m) at 3500 rpm.



1980-1985 Honda Quintet / Quint (Japan)

1980-1981 Honda Accord


The long-stroke, 12-valve CVCC-II for Japan and 8-valve for Europe and Asia ER four-cylinder engine was only used in the AA/VF/FA series City/Jazz (1981–86).[4][6] It was available as a normally aspirated carburated version or with Honda's own PGM-FI fuel injection as one of a very few turbocharged engines built by Honda. The Japanese market CVCC engine was also known as COMBAX, an acronym of COMpact Blazing-combustion AXiom. The E-series were tuned for economy, with higher gearing and later on with computer-controlled variable lean burn. As of March 1985, the naturally aspirated ER engines gained composite conrods (a world first in a production car), lighter and stronger these helped further reduce fuel consumption.

The lower powered engines in the commercial 'Pro' series had a lower compression, a mechanically timed ignition rather than the breakerless setup found in the passenger cars, and a manual choke. The ER had five crankshaft bearings and the overhead camshaft was driven by a cogged belt.

Engine typeInline four, SOHC CVCC-II 12-valve[7][8]
Displacement1,231 cc (75.1 cu in)
Bore x stroke66.0 x 90.0 mm
Fuel typeLeaded (export) or unleaded (domestic)
powertorquefuel feedcompressionnotes
33 kW (45 PS) DIN at 4500 rpm82 N⋅m (60 ft⋅lb) at 2500 rpm1 bbl carburetor10,2:1 (normal)European market
41 kW (56 PS) DIN at 5000 rpm93 N⋅m (69 ft⋅lb) at 3500 rpm1 bbl carburetor, manual choke10,2:1 (super)European market (ER1 & ER4 engine)
61 PS (45 kW) JIS at 5000 rpm9.8 kg⋅m (96 N⋅m; 71 lb⋅ft) at 3000 rpm2 bbl carburetor9,0:1 (unleaded)Pro T, Pro F
63 PS (46 kW) JIS at 5000 rpm10.0 kg⋅m (98 N⋅m; 72 lb⋅ft) at 3000 rpm2 bbl carburetor10,0:1 (unleaded)E-series, U, R (AT), Cabriolet (AT)
67 PS (49 kW) JIS at 5000 rpm10.0 kg⋅m (98 N⋅m; 72 lb⋅ft) at 3500 rpm2 bbl carburetor10,0:1 (unleaded)R and Cabriolet with MT
100 PS (74 kW) JIS at 5500 rpm15.0 kg⋅m (147 N⋅m; 108 lb⋅ft) at 3000 rpmFI, turbo7,5:1 (unleaded)City Turbo
110 PS (81 kW) JIS at 5500 rpm16.3 kg⋅m (160 N⋅m; 118 lb⋅ft) at 3000 rpmFI, turbo + intercooler7,6:1 (unleaded)[9]Turbo II 'Bulldog'

Carburetor versions used either a single or 2bbl downdraft Keihin. The turbocharger in the Turbo and Turbo II was developed together with IHI, the Turbo II being equipped with an intercooler and a computer-controlled wastegate.[4]

ER1-4 Honda City


The ES displaced 1,829 cc (1.829 L; 111.6 cu in). All ES engines were SOHC 12-valve engines. The ES1 used dual sidedraft carburetors to produce 100 hp (75 kW) at 5500 rpm and 104 lb·ft (141 N·m) at 4000 rpm. The ES2 replaced this with a standard 3 barrel carburetor for 86 hp (64 kW) at 5800 rpm and 99 lb·ft (134 N·m) at 3500 rpm. Finally, the ES3 used PGM-FI for 101 hp (75 kW) at 5800 rpm and 108 lb·ft (146 N·m) at 2500 rpm.

How to convert or import a PDF file to a DWG file using AutoCAD. Prior to AutoCAD 2017, it was not possible to convert a PDF file to a DWG file using AutoCAD or AutoCAD LT. PDF files could only be inserted as underlays (external references). The content could then be traced and scaled to known dimensions, if desired. When I convert AutoCAD files with MSWord documents embedded in the '.dwg' file to PDF using BlueBeam software, AutoCAD is converting the MSWord files to bitmaps. Pdf Other Results for Dwg To Pdf Bluebeam: Convert DWG to PDF - Bluebeam, Inc. New to the forums. Great program that keeps getting better. I have a quick question regarding DWG Exporting. I believe PDF Revu CAD Edition can export DWG to.

  • ES1
    • 1983-1984 Honda Prelude
  • ES2
    • 1984-1985 Honda Accord
  • ES3
    • 1985- Honda AccordSE-i
    • 1981-1985 Honda VigorVTL-i, VT-i, TT-i (Japan)


The EV displaced 1,342 cc (1.3 L; 81.9 cu in) and was an SOHC 12-valve design. Three-barrel carburetors produced 60 hp (45 kW) at 5500 rpm and 73 lb·ft (99 N·m) at 3500 rpm for the US market. The JDM version, featuring 12 valves and auxiliary CVCC valves, produced 80 PS (59 kW) at 6000 rpm and 11.3 kg⋅m (111 N⋅m) at 3500 rpm. It was available in all bodystyles of the third generation Honda Civic.[10]

  • EV1
    • 1983-1986 Honda Civic
    • 1983-1986 Honda CRX
  • EV2
    • 1984-1990 Rover 213 (70 hp)


The final E-family engine was the EW, presented along with the all new third generation Honda Civic in September 1983. Displacing 1,488 cc (1.5 L; 90.8 cu in), the EWs were SOHC 12-valve engines. Early 3 barrel EW1s produced from 58 to 76 hp (43 to 57 kW) and 108 to 114 N⋅m (79.7 to 84.1 lb⋅ft). The fuel injected EW3 and EW4 produced 91 hp (68 kW) at 5,500 rpm and 126 N⋅m (92.9 lb⋅ft) at 4,500 rpm. The 'EW' name was replaced by the Honda D15 series, with the EW (1, 2, 3, 4, and 5) renamed to D15A (1, 2, 3, 4, and 5) in 1987. It also received a new engine stamp placement on the front of the engine like the 'modern D series' (1988+).

  • EW1 (D15A2 in 1987)
    • 1984-1985 Honda Civic/CRX DX (unlabeled)
    • 1984-1986 Honda Civic
    • 1984-1986 Honda Shuttle
  • EW2 (D15A3?)
    • 1984-1987 Honda Civic non-CVCC (CDM)
  • EW3
    • 1985 Honda CRX Si non-CVCC
  • EW4 (D15A4 in 1987)
    • 1985-1986 Honda CRX Si non-CVCC
    • 1986 Honda Civic Si non-CVCC
  • EW5 (D15A5 in 1987)
    • similar to the EW1, but fuel injected 12 valve model with four axiliary valves. A third throttle plate in the throttle body supplied intake air to a fifth injector which powered the CVCC ports, The rated power is different between the Civic and the CR-X: the Civic makes 100 PS (74 kW) at 5800 rpm and 13.2 kg⋅m (95.5 lb⋅ft) torque at 4000 rpm, the CR-X made 110 PS (108 hp) at 5800 rpm and 13.8 kg⋅m (99.8 lb⋅ft) torque at 4500 rpm. Differences in power are largely down to a more efficient exhaust system on the CR-X as it used a factory cast iron 4-2-1 extractor through a catalytic converter further down the exhaust system and had twin exit tail pipes. The Civic had a short 4-1 design into the catalytic converter and a single pipe exit. There was a revised intake manifold for vehicles produced in 1986 and 1987. The EW5 was only available in Japan. It came in the following models: CR-X 1.5i, Civic 25i Hatchback, Ballade CRi Sedan.


EY (1598 cc) 94 PS at 5800 rpm, 13.6 kg·m at 3500 rpm.

Engine manufacturer Honda Engine code EY Number of cylinders: Inline-four Capacity 1.6 litre1598 cc(97.516 cu in) Bore × Stroke 80 × 79.5 mm 3.15 × 3.13 in Bore/stroke ratio 1.01 Valve gear SOHC 3 valves per cylinder 12 Total valves

Used in 1983 Honda Accord 1600 E-AC (all trim levels)


  1. ^'Honda Worldwide - History'. world.honda.com.
  2. ^'Honda Worldwide - History'. world.honda.com.
  3. ^ ab'Honda Worldwide - History'. world.honda.com.
  4. ^ abcWorld Cars 1985. Pelham, NY: The Automobile Club of Italy/Herald Books. 1985. pp. 345–346. ISBN0-910714-17-7.
  5. ^ abHow to Rebuild Your Honda Car Engine by Tom Wilson, copyright 1985, HP Books, ISBN0-89586-256-5
  6. ^Koichi Inouye (1985). World Class Cars Volume 2: Honda, from S600 to City. Tokyo: Hoikusha. pp. 120–125. ISBN4-586-53302-1.
  7. ^'Honda: Auto Lineup Archive'. Honda Motor Co., Ltd. Archived from the original on 2010-05-23.
  8. ^Auto Katalog 1985. Stuttgart: Vereinigte Motor-Verlage GmbH & Co. KG. 1984. pp. 236–237.
  9. ^According to 'Honda City Turbo II' page in the Honda Auto Archive and Auto Katalog 1985, p 232. World Class Cars #2: Honda (p 121) lists compression as 7,4:1.
  10. ^World Cars 1985, pp. 346–348
  • Setright, L. J. K. (1975). Some Unusual Engines. London: Mechanical Engineering Publications Limited.
Retrieved from 'https://en.wikipedia.org/w/index.php?title=CVCC&oldid=917754170'
  • пятница 27 марта
  • 97